Rational synthesis of a heparan sulfate saccharide that promotes the activity of BMP2.

Heparan sulfate (HS) is a glycosaminoglycan (GAG) found throughout nature and is involved in a wide range of functions including modulation of cell signalling via sequestration of growth factors. Current consensus is that the specificity of HS motifs for protein binding are individual for each protein. Given the structural complexity of HS the synthesis of libraries of these compounds to probe this is not trivial. Herein we present the synthesis of an HS decamer, the design of which was undertaken rationally from previously published data for HS binding to the growth factor BMP-2. The biological activity of this HS decamer was assessed in vitro, showing that it had the ability to both bind BMP-2 and increase its thermal stability as well as enhancing the bioactivity of BMP-2 in vitro in C2C12 cells. At the same time no undesired anticoagulant effect was observed. This decamer was then analysed in vivo in a rabbit model where higher bone formation, bone mineral density (BMD) and trabecular thickness were observed over an empty defect or collagen implant alone. This indicated that the HS decamer was effective in promoting bone regeneration in vivo.

Affinity-selected heparan sulfate collagen device promotes periodontal regeneration in an intrabony defect model in Macaca fascicularis.

It is challenging to regenerate periodontal tissues fully. We have previously reported a heparan sulfate variant with enhanced affinity for bone morphogenetic protein-2, termed HS3, that enhanced periodontal tissue regeneration in a rodent model. Here we seek to transition this work closer to the clinic and investigate the efficacy of the combination HS3 collagen device in a non-human primate (NHP) periodontitis model. Wire-induced periodontitis was generated in ten Macaca fascicularis, and defects were treated with Emdogain or collagen (CollaPlug) loaded with (1) distilled water, (2) HS low (36 µg of HS3), or (3) HS high (180 µg of HS3) for 3 months. At the endpoint, microscopic assessment showed significantly less epithelial down-growth, greater alveolar bone filling, and enhanced cementum and periodontal ligament regeneration following treatment with the HS-collagen combination devices. When evaluated using a periodontal regeneration assessment score (PRAS) on a scale of 0-16, collagen scored 6.78 (± 2.64), Emdogain scored 10.50 (± 1.73) and HS low scored 10.40 (± 1.82). Notably, treatment with HS high scored 12.27 (± 2.20), while healthy control scored 14.80 (± 1.15). This study highlights the efficacy of an HS-collagen device for periodontal regeneration in a clinically relevant NHP periodontitis model and warrants its application in clinical trials.

Paraspinal myopathy-induced intervertebral disc degeneration and thoracolumbar kyphosis in TSC1mKO mice model-a preliminary study.

BACKGROUND: Increasing kyphosis of the spine in a human is a well-recognized clinical phenomenon that has been associated with back pain, poor physical performance and disability. The pathophysiology of age-related kyphosis is complex and has been associated with physiological changes in vertebrae, intervertebral disc (IVD) and paraspinal musculature, which current cross-sectional studies are unable to demonstrate. Creating an in vivo, paraspinal myopathic animal model for longitudinal study of these changes under controlled conditions is thus warranted. PURPOSE: To confirm the TSC1 gene knockout effect on paraspinal muscle musculature; to analyze the development of spinal kyphosis, IVD degeneration and vertebra structural changes in a longitudinal manner to gain insights into the relationship between these processes. STUDY DESIGN: A prospective cohort study of 28 female mice, divided into 4 groups-9-month-old TSC1mKO (n=7), 9-month-old control (n=4), 12-month-old TSC1mKO (n=8), and 12-month-old controls (n=9). METHODS: High resolution micro-computed tomography was used to measure sagittal spinal alignment (Cobb's angle), vertebral height, vertebral body wedging, disc height index (DHI), disc wedge index (DWI), histomorphometry of trabecular bone and erector spinae muscle cross-sectional area. Paraspinal muscle specimens were harvested to assess for myopathic features with H&E stain, muscle fiber size, density of triangular fiber and central nucleus with WGA/DAPI stain, and percentage of fibers with PGC-1α stain. Intervertebral discs were evaluated for disc score using FAST stain. RESULTS: Compared to controls, paraspinal muscle sections revealed features of myopathy in TSC1mKO mice similar to human sarcopenic paraspinal muscle. While there was significantly greater presence of small triangular fiber and density of central nucleus in 9-and 12-month-old TSC1mKO mice, significantly larger muscle fibers and decreased erector spinae muscle cross-sectional area were only found in 12-month-old TSC1mKO mice compared to controls. TSC1mKO mice developed accelerated thoracolumbar kyphosis, with significantly larger Cobb angles found only at 12 months old. Structural changes to the trabecular bone in terms of higher bone volume fraction and quality, as well as vertebral body wedging were observed only in 12-month-old TSC1mKO mice when compared to controls. Disc degeneration was observed as early as 9 months in TSC1mKO mice and corresponded with disc wedging. However, significant disc height loss was only observed when comparing 12-month-old TSC1mKO mice with controls. CONCLUSIONS: This study successfully shows the TSC1 gene knockout effect on the development of paraspinal muscle myopathy in a mouse which is characteristic of sarcopenia. The TSC1mKO mice is by far the best model available to study the pathological consequence of sarcopenia on mice spine. With paraspinal muscle myopathy established as early as 9 months, TSC1mKO mice developed disc degeneration and disc wedging. This is followed by kyphosis of the spine at 12 months with concomitant disc height loss and vertebral body wedging due to bone remodeling. Age-related bone loss was not found in our study, suggesting osteoporosis and myopathy-induced vertebral body wedging are likely two independent processes. CLINICAL SIGNIFICANCE: This is the first study to provide key insights on the early and late consequences of paraspinal myopathy on intervertebral disc degeneration, spinal kyphosis, and vertebral body changes. With this new understanding, future studies evaluating therapies for spinal degeneration may be performed to develop time-sensitive interventions.

A Heparan Sulfate Device for the Regeneration of Osteochondral Defects.

IMPACT STATEMENT: Repairing damaged joint cartilage remains a significant challenge. Treatment involving microfracture, tissue grafting, or cell therapy provides some benefit, but seldom regenerates lost articular cartilage. Providing a point-of-care solution that is cell and tissue free has the potential to transform orthopedic treatment for such cases. Glycosaminoglycans such as heparan sulfate (HS) are well suited for this purpose because they provide a matrix that enhances the prochondrogenic activities of growth factors normally found at sites of articular damage. In this study, we show the potential of a novel HS device, which is free of exogenous cells or growth factors, in regenerating osteochondral defects.

A polycaprolactone-ß-tricalcium phosphate-heparan sulphate device for cranioplasty.

BACKGROUND: Cranioplasty is a surgical procedure used to treat a bone defect or deformity in the skull. To date, there is little consensus on the standard-of-care for graft materials used in such a procedure. Graft materials must have sufficient mechanical strength to protect the underlying brain as well as the ability to integrate and support new bone growth. Also, the ideal graft material should be individually customized to the contours of the defect to ensure a suitable aesthetic outcome for the patient. PURPOSE: Customized 3D-printed scaffolds comprising of polycaprolactone-ß-tricalcium phosphate (PCL-TCP) have been developed with mechanical properties suitable for cranioplasty. Osteostimulation of PCL-TCP was enhanced through the addition of a bone matrix-mimicking heparan sulphate glycosaminoglycan (HS3) with increased affinity for bone morphogenetic protein-2 (BMP-2). Efficacy of this PCL-TCP/HS3 combination device was assessed in a rat critical-sized calvarial defect model. METHOD: Critical-sized defects (5 mm) were created in both parietal bones of 19 Sprague Dawley rats (Male, 450-550 g). Each cranial defect was randomly assigned to 1 of 4 treatment groups: (1) A control group consisting of PCL-TCP/Fibrin alone (n = 5); (2) PCL-TCP/Fibrin-HSft (30 µg) (n = 6) (HSft is the flow-through during HS3 isolation that has reduced affinity for BMP-2); (3) PCL-TCP/Fibrin-HS3 (5 µg) (n = 6); (4) PCL-TCP/Fibrin-HS3 (30 µg) (n = 6). Scaffold integration and bone formation was evaluated 12-weeks post implantation by µCT and histology. RESULTS: Treatment with PCL-TCP/Fibrin alone (control) resulted in 23.7% ± 1.55% (BV/TV) of the calvarial defect being filled with new bone, a result similar to treatment with PCL-TCP/Fibrin scaffolds containing either HSft or HS3 (5 µg). At increased amounts of HS3 (30 µg), enhanced bone formation was evident (BV/TV = 38.6% ± 9.38%), a result 1.6-fold higher than control. Further assessment by 2D µCT and histology confirmed the presence of enhanced bone formation and scaffold integration with surrounding host bone only when scaffolds contained sufficient bone matrix-mimicking HS3. CONCLUSION: Enhancing the biomimicry of devices using a heparan sulphate with increased affinity to BMP-2 can serve to improve the performance of PCL-TCP scaffolds and provides a suitable treatment for cranioplasty.

Fabrication of polycaprolactone-silanated ß-tricalcium phosphate-heparan sulfate scaffolds for spinal fusion applications.

BACKGROUND CONTEXT: Interbody spinal fusion relies on the use of external fixation and the placement of a fusion cage filled with graft materials (scaffolds) without regard for their mechanical performance. Stability at the fusion site is instead reliant on fixation hardware combined with a selected cage. Ideally, scaffolds placed into the cage should both support the formation of new bone and contribute to the mechanical stability at the fusion site. PURPOSE: We recently developed a scaffold consisting of silane-modified PCL-TCP (PCL-siTCP) with mechanical properties that can withstand the higher loads generated in the spine. To ensure the scaffold more closely mimicked the bone matrix, we incorporated collagen (Col) and a heparan sulfate glycosaminoglycan sugar (HS3) with increased affinity for heparin-binding proteins such as bone morphogenetic protein-2 (BMP-2). The osteostimulatory characteristic of this novel device delivering exogenous BMP2 was assessed in vitro and in vivo as a prelude to future spinal fusion studies with this device. STUDY DESIGN/SETTING: A combination of cell-free assays (BMP2 release), progenitor cell-based assays (BMP2 bioactivity, cell proliferation and differentiation), and rodent ectopic bone formation assays was used to assess the osteostimulatory characteristics of the PCL-siTCP-based scaffolds. MATERIALS AND METHODS: Freshly prepared rat mesenchymal stem cells were used to determine reparative cell proliferation and differentiation on the PCL-siTCP-based scaffolds over a 28-day period in vitro. The bioactivity of BMP2 released from the scaffolds was assessed on progenitor cells over a 28-day period using ALP activity assays and release kinetics as determined by enzyme-linked immunosorbent assay. For ectopic bone formation, intramuscular placement of scaffolds into Sprague Dawley rats (female, 4 weeks old, 120-150 g) was achieved in five animals, each receiving four treatments randomized for location along the limb. The four groups tested were (1) PCL-siTCP/Col (5-mm diameter×1-mm thickness), PCL-siTCP/Col/BMP2 (5 µg), (3) PCL-siTCP/Col/HS3 (25 µg), and (4) PCL-siTCP/Col/HS3/BMP2 (25 and 5 µg, respectively). Bone formation was evaluated at 8 weeks post implantation by microcomputed tomography (µCT) and histology. RESULTS: Progenitor cell-based assays (proliferation, mRNA transcripts, and ALP activity) confirmed that BMP2 released from PCL-siTCP/Col/HS3 scaffolds increased ALP expression and mRNA levels of the osteogenic biomarkers Runx2, Col1a2, ALP, and bone gla protein-osteocalcin compared with devices without HS3. When the PCL-siTCP/Col/HS3/BMP2 scaffolds were implanted into rat hamstring muscle, increased bone formation (as determined by two-dimensional and three-dimensional µCTs and histologic analyses) was observed compared with scaffolds lacking BMP2. More consistent increases in the amount of ectopic bone were observed for the PCL-siTCP/Col/HS3/BMP2 implants compared with PCL-siTCP/Col/BMP2. Also, increased mineralizing tissue within the pores of the scaffold was seen with modified-tetrachrome histology, a result confirmed by µCT, and a modest but detectable increase in both the number and the thickness of ectopic bone structures were observed with the PCL-siTCP/Col/HS3/BMP2 implants. CONCLUSIONS: The combination of PCL-siTCP/Col/HS3/BMP2 thus represents a promising avenue for further development as a bone graft alternative for spinal fusion surgery.